GRANDSTREAM HT812 Analog FXS IP Gateway 2 Port + NAT Router User Guide

Register a SIP Account  

The HT812/HT814 support 2 profiles which can be configured with 2 SIP accounts. Please refer to the following steps in order  

to register your accounts via web user interface  

1. Access your HT812/HT814 web UI by entering its IP address in your favorite browser.  

2. Enter your admin password (default: admin).  

3. Press Login to access your settings.  

4. Go to Profile (1 or 2) pages.  

5. In Profile tab, set the following:  

1. Account Active to Yes.  

2. Primary SIP Server field with your SIP server IP address or FQDN.  

3. Failover SIP Server with your Failover SIP Server IP address or FQDN. Leave empty if not available.  

4. Prefer Primary SIP Server to No or Yes depending on your configuration. Set to No if no Failover SIP Server is  

defined. If “Yes”, account will register to Primary SIP Server when failover registration expires.  

5. Outbound Proxy: Set your Outbound Proxy IP Address or FQDN. Leave empty if not available.  

6. After configuring the SIP server and activating the profiles, you should access to FXS Ports page to register your  

accounts. In FXS Ports tab, set the following:  

1. SIP User ID: User account information, provided by VoIP service provider (ITSP). Usually in the form of digit similar to  

phone number or actually a phone number.  

2. Authenticate ID: SIP service subscriber’s Authenticate ID used for authentication. Can be identical to or different  

from SIP User ID.  

3. Authenticate Password: SIP service subscriber’s account password to register to SIP server of ITSP. For security  

reasons, the password will field will be shown as empty.  

4. Name: Any name to identify this specific user.  

5. Set Enable Port to Yes.  

For more information, related to above options please refer to Profile(s) settings and FXS Port Settings.  

7. Press Apply at the bottom of the page to save your configuration.  

Figure 11: SIP Profiles Settings  

Figure 12: SIP Accounts settings  

After applying your configuration, your account will register to your SIP Server, you can verify if it has been correctly  

registered with your SIP server from your HT812/HT814 web interface under Status  Port Status  Registration (If it  

displays Registered, it means that your account is fully registered, otherwise it will display Not Registered so in this case you  

must double check the settings or contact your provider).  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	GRANDSTREAM HT812 Analog FXS IP Gateway 2 Port + NAT Router User Guide
Make	GRANDSTREAM
Language	English
Filetype	PDF (Download)
File size	MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• GRANDSTREAM

Questions and Answers (0)

If you have any questions regarding GRANDSTREAM HT812 Analog FXS IP Gateway 2 Port + NAT Router User Guide, please ask here and describe the problem in detail.