GRANDSTREAM HT812 Analog FXS IP Gateway 2 Port + NAT Router User Guide

Figure 10: Web HTTP Port  

Web Configuration Pages Definitions  

This section describes the options in the HT812/HT814 Web UI. As mentioned, you can log in as an administrator or an end  

user.  

Status: Displays the system info, network status, account status, and line options.  

Basic Settings: Configures the end user level password, IP address modes, web access, time zone settings and language.  

Advanced Settings: Configures networks, upgrading and provisioning, TR-069, security settings, date and time, syslog,  

audio settings, call settings and call progress tones.  

Profile (1,2): Configures the SIP Server, SIP Registration, NAT settings, call features, ring tones.  

FXS Ports: Configures SIP accounts settings, Off hook Auto-dial.  

Status Page Definitions  

Status  

Shows device ID in hexadecimal format. This is needed by network administrators for troubleshooting. The  

MAC address will be used for provisioning and can be found on the label on original box and on the label  

located on the bottom panel of the device.  

MAC  

Note: The device has two MAC addresses, one for the WAN port and one for the LAN port. The MAC address  

Address  

located on the bottom panel of the device is the MAC address of LAN port. The MAC address of WAN port is  

MAC address of LAN port +1.  

Example: MAC Address: WAN – “00:0B:82:25:AF:32”, LAN – “00:0B:82:25:AF:31”.  

WAN IPv4  

Displays assigned IPv4 address.  

Address  

WAN IPv6  

Displays assigned IPv6 address.  

Address  

VPN IPv4  

Address  

Displays assigned OpenVPN IPv4 address.  

VPN IPv6  

Address  

Displays assigned OpenVPN IPv6 address.  

Product  

Model  

Displays product model info. Default is HT812 or HT814.  

Hardware  

Version  

Displays the hardware revision information and the part number.  

Program: Specifies Program version. This is the main firmware release number, which is always used for  

identifying the software system of the HT812/HT814.  

Bootloader: Specifies Boot version.  

Software  

Core: Specifies Core version.  

version  

Base: Specifies Base version.  

CPE: Specifies CPE version. CPE version is displayed only when HT812/HT814 is connected to an ACS  

using TR-069 protocol.  

Software  

Status  

Indicates the current software status of the HT (Running or Stopped).  

System  

Up Time  

Indicates actual system time and uptime since last reboot.  

CPU Load Indicates CPU load (%)  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	GRANDSTREAM HT812 Analog FXS IP Gateway 2 Port + NAT Router User Guide
Make	GRANDSTREAM
Language	English
Filetype	PDF (Download)
File size	MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• GRANDSTREAM

Questions and Answers (0)

If you have any questions regarding GRANDSTREAM HT812 Analog FXS IP Gateway 2 Port + NAT Router User Guide, please ask here and describe the problem in detail.