GRANDSTREAM HT812 Analog FXS IP Gateway 2 Port + NAT Router User Guide

For example: If configured as 617x+, Call Waiting Tone 1 will be used in case of waiting call arrived from the area  

code 617. Any other incoming call waiting will be using cadence defined in parameter Call Waiting Tone located  

under Advanced Settings Configuration page.  

This feature allows user to customize call waiting tone. User has 10 choices.  

Syntax: f1=val[,f2=val[,c=on1/off1[-on2/off2[-on3/off3]]]];  

(Frequencies are in (300, 3400) Hz and cadence on and off are in (0, 64000) ms)  

Note: The configuration, completed in Distinctive Call Waiting Tones block in the same page, applies to call waiting  

cadences configured here.  

Call Waiting  

Tones  

Default is f1=440@-13,c=300/10000;  

Call Features  

Settings  

When enabled, Do No Disturb, Call Forward and other call features can be used via the local feature codes on the  

phone. Otherwise, the ITSP feature codes will be used. Enable All will override all individual features enable setting.  

Default is Yes  

Enable Call  

Features  

Allows users to reset all call features configuration.  

Default is No  

Reset Call  

Features  

Allow users to customize the SRTP feature codes. Default is Yes  

– Enable SRTP: Default is 16  

SRTP Feature  

– Disable SRTP: Default is 17  

– Enable SRTP per call: Default is 18  

– Disable SRTP per call: Default is 19  

SRTP per call  

Feature  

Allow users to customize the CID feature codes. Default is Yes  

– Enable CID: Default is 31  

CID Feature  

– Disable CID: Default is 30  

– Enable CID per call: Default is 82  

– Disable CID per call: Default is 67  

CID per call  

Feature  

Allow users to customize the Direct IP feature code. Default is Yes  

– Direct IP Calling: Default is 47  

Direct IP Calling  

Feature  

Allow users to customize the CW feature codes. Default is Yes  

– Enable CW: Default is 51  

CW Feature  

– Disable CW: Default is 50  

– Enable CW per call: Default is 71  

– Disable CW per call: Default is 70  

CW per call  

Feature  

Allow users to customize the Call Return feature code. Default is Yes  

– Call return: Default is 69  

Call Return  

Feature  

Allow users to customize the Unconditional Forward feature codes.  

Default is Yes  

Unconditional  

Forward Feature  

– Enable Unconditional Forward: Default is 72  

– Disable Unconditional Forward: Default is 73  

Allow users to customize the Busy Forward feature codes. Default is Yes  

– Enable Busy Forward: Default is 90  

Busy Forward  

Feature  

– Disable Busy Forward: Default is 91  

Allow users to customize the Delayed Forward feature codes. Default is Yes  

– Enable Delayed Forward: Default is 92  

Delayed  

Forward Feature  

– Disable Delayed Forward: Default is 93  

Allow users to customize the Paging feature code. Default is Yes  

– Paging: Default is 74  

Paging Feature  

DND Feature  

Allow users to customize the CW feature codes. Default is Yes  

– Enable DND: Default is 78  

– Disable DND: Default is 79  

Allow users to customize the Blind Transfer feature code. Default is Yes  

– Enable Blind Transfer: Default is 87  

Blind Transfer  

Feature  

Default is Yes  

Disable LEC per  

call Feature  

– Disable LEC per call: Default is 03  

Disable Bellcore  

Style 3-Way  

Conference  

Default is No  

Default is Yes  

Star Code 3WC  

Feature  

– Star Code 3WC: Default is 23  

Allow users to customize the Forced Codec feature code. Default is Yes  

– Forced Codec: Default is 02  

Forced Codec  

Feature  

Default is Yes  

PCMU Codec  

Feature  

– PCMU Codec: Default is 7110  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	GRANDSTREAM HT812 Analog FXS IP Gateway 2 Port + NAT Router User Guide
Make	GRANDSTREAM
Language	English
Filetype	PDF (Download)
File size	MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• GRANDSTREAM

Questions and Answers (0)

If you have any questions regarding GRANDSTREAM HT812 Analog FXS IP Gateway 2 Port + NAT Router User Guide, please ask here and describe the problem in detail.