GRANDSTREAM HT812 Analog FXS IP Gateway 2 Port + NAT Router User Guide

2. NAT related info (INFO level)  

3. sent or received SIP message (DEBUG level)  

4. SIP message summary (INFO level)  

5. inbound and outbound calls (INFO level)  

6. registration status change (INFO level)  

7. negotiated codec (INFO level)  

8. Ethernet link up (INFO level)  

9. SLIC chip exception (WARNING and ERROR levels)  

10. memory exception (ERROR level)  

extra syslog style (EXTRA DEBUG level)  

Note: A reboot is required to take effect.  

Configures whether the SIP log will be included in the syslog messages.  

The default setting is No.  

Send SIP Log  

Allows users to make packet capture including the secret key to decrypt the captured TLS  

packets. Default value is No.  

With Secret Key Information  

Information Capture  

Allows the user to start the Information capture process, which can be enabled with a reboot  

option every day at a specific time or disabled, Disabled by default.  

Always Send HTTP Basic  

Authentication Information  

If set to Yes, the device will send configured username and password within HTTP request  

without server sending authentication challenge.  

Default is No. When “Yes, reboot every day at hour” or “Yes, reboot every week at day” or “Yes,  

reboot every month at day” is checked, user can specify “Hour of the day (0-23)” or “Day of the  

week (0-6)” or “Day of the month (0-30)”. Default time is Monday 1AM.  

Automatic Reboot  

Press Download button to download device configuration file to local computer. The filename is  

“config.txt”. The file is plain text and not including password fields.  

Download Device Configuration  

Download Device XML  

Configuration  

Press Download to download device configuration file to local computer. The filename is  

“config.xml”. The file will not include password fields.  

Press Upload from local directory button to load the firmware file to the device from your  

computer. The firmware filename should be “ht80xfw.bin” (ht802fw.bin for HT802 for instance),  

"ht81xfw.bin” for HT812/HT814 or "ht818fw.bin” for HT818.  

Upload Firmware  

Press Upload from local directory button to load configuration file to the device from your  

computer. The configuration file should be an XML file (for instance: “config.xml”). Note: The  

field  

Upload Configuration  

is not mandatory in the document but if available only device with specified MAC address will  

accept the configuration file.  

Press Download button to export device backup configuration to computer.  

Export Backup Configuration  

The output is “cfg<mac>_enc.xml” (where <mac> is the MAC address of the device). The file is  

encrypted and can be used on same device only.  

Restore From Backup  

Configuration  

Press Upload button to restore device configuration from previously exported backup  

configuration.  

E911/HELD Protocol:  

Enable E911  

Enable Enhanced 911 call. Default is disabled  

HELD Protocol  

Configure HELD transfer protocol. HTTP or HTTPS  

The valid synchronization interval is between 30 to 1440 minutes. The synchronization is off  

when the interval is 0.  

HELD Synchronization Interval  

Location Server  

Configure the primary Location Information Server (LIS) address  

Configure the user name of the primary Location Information Server (LIS)  

Configure the password of the primary Location Information Server (LIS)  

Configure the seconary Location Information Server (LIS) address  

Location Server Username  

Location Server Password  

Secondary Location Server  

Secondary Location Server  

Username  

Configure the user name of the secondary Location Information Server (LIS)  

Configure the password of the secondary Location Information Server (LIS)  

Secondary Location Server  

Password  

HELD Location Types  

HELD NAI  

Configure "locationType" element in the location request. "geodetic", "civic" and "location URI"  

Configure "locationType" element in the location request. "geodetic", "civic" and "location URI"  

HELD Identity  

HELD Identity 1-10  

HELD Identity 1-10 Value  

E911 Emergency Numbers  

Geolocation-Routing Header  

HELD Identity value  

A user can configure multiple emergency numbers separated with the delimiter symbol ";".  

If "Yes", E.911 INVITE message includes the "Geolocation-Routing" header with the value "Yes"  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	GRANDSTREAM HT812 Analog FXS IP Gateway 2 Port + NAT Router User Guide
Make	GRANDSTREAM
Language	English
Filetype	PDF (Download)
File size	MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• GRANDSTREAM

Questions and Answers (0)

If you have any questions regarding GRANDSTREAM HT812 Analog FXS IP Gateway 2 Port + NAT Router User Guide, please ask here and describe the problem in detail.