GRANDSTREAM HT812 Analog FXS IP Gateway 2 Port + NAT Router User Guide

Figure 2: HT814 Package Contents  

Check the package before installation. If you find anything missing, contact your system administrator.  

HT812/HT814 Ports Description  

The following figure describes the different ports on the back panel of the HT812/HT814.  

Figure 3: HT812 Back Panel  

Figure 4: HT814 Back Panel  

Phone 1 & 2 (HT812)  

Connects the analog phones / fax machines to the ATA using an RJ-11 telephone cable.  

Phone 1,2,3 & 4 (HT814)  

Connects the ATA to your router, switch or modem using an Ethernet RJ45 network cable.  

co  

WAN  

LAN  

Connects the ATA to your PC or switch using an Ethernet RJ45 network cable.  

Connects the ATA to PSU  

DC Power  

Reset  

(12V – 0.5A for HT812) and (12V – 1A for HT814).  

Factory reset button. Press for 7 seconds to reset factory default settings.  

Table 3: HT812/HT814 Connectors Definitions  

Connecting HT812/HT814  

The HT812/HT814 are designed for easy configuration and easy installation, to connect your HT812/HT814, please follow the  

steps below:  

Scenario 1: Connecting the HT812/HT814 using WAN Port  

When connecting HT812/HT814 using the WAN port, they will act as simple DHCP Client.  

1. Insert a standard RJ11 telephone cable into the phone ports and connect the other end of the telephone cable to a  

standard touch-tone analog telephone.  

2. Connect the WAN port of the HT812/HT814 to a router, switch or modem using an Ethernet cable.  

3. Insert the power adapter into the HT812/HT814 and connect it to a wall outlet and make sure to respect the technical  

specifications of the power adapter used.  

4. Power, WAN and Phone LEDs will be solidly lit when the HT812/HT814 is ready for use.  

Scenario 2: Connecting the HT812/HT814 using LAN Port  

When connecting the HT812/HT814 using the LAN port, they will act as a router and DHCP serving addresses, the devices  

connected with HT812/HT814 LAN will pull DHCP addresses from your HT812/HT814.  

1. Insert a standard RJ11 telephone cable into the phone ports and connect the other end of the telephone cable to a  

standard touch-tone analog telephone.  

2. Connect a computer or switch to the LAN port of the HT812/HT814 using an Ethernet Cable.  

3. Insert the power adapter into the HT812/HT814 and connect it to a wall outlet and make sure to respect the technical  

specifications of the power adapter used.  

4. Power, LAN and Phone LEDs will be solidly lit when the HT812/HT814 is ready for use.  

Please make sure to enable NAT Router under Web GUI  Basic Settings Device Mode.  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	GRANDSTREAM HT812 Analog FXS IP Gateway 2 Port + NAT Router User Guide
Make	GRANDSTREAM
Language	English
Filetype	PDF (Download)
File size	MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• GRANDSTREAM

Questions and Answers (0)

If you have any questions regarding GRANDSTREAM HT812 Analog FXS IP Gateway 2 Port + NAT Router User Guide, please ask here and describe the problem in detail.