intwine connected ICG-150 Gateway 150 Cellular Router User Guide

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

ICG-150 USER GUIDE  

Cellular  

To access the Cellular interface setngs hover over Network then select Cellular.  

NOTE: The majority of the following setngs should NOT be changed!  

To change the APN which the SIM is atemptng to authentcate to you will need to modify  

the Profiles secton:  

Here the APN is set to Verizon's mw01.VZWSTATIC. Simply click on the APN name and the  

text will change to a text box:  

Change the APN to the desired value then press the OK buton on the right side of the row.  

Once done, press the Apply buton at the botom of the page.  

The only other setngs that a user might change are the Connecton status setngs. Note  

that these defaults are set to minimize the amount of cellular data used.  

The system will automatcally monitor the traffic on the system to determine if the cellular  

modem is connected to the network. In cases where traffic is low or sporadic, the system will  

initate an ICMP ping message to the IP address specified in the "Detecton Server" box. This  

defaults to 8.8.8.8. By default, this ping will occur every 600 seconds with a 20 second  

tmeout. If 5 failures occur the system will reset the connecton.  

14  

©2022 Rev 1. Intwine Connect. All Rights Reserved. | +1(216)314-2922 | info@intwineconnect.com | intwineconnect.com  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	intwine connected ICG-150 Gateway 150 Cellular Router User Guide
Make	intwine connected
Language	English
Filetype	PDF (Download)
File size	0.51 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• intwine connected

Questions and Answers (0)

If you have any questions regarding intwine connected ICG-150 Gateway 150 Cellular Router User Guide, please ask here and describe the problem in detail.