intwine connected ICG-150 Gateway 150 Cellular Router User Guide

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

ICG-150 USER GUIDE  

You can change the type of Wi-Fi network by selectng the desired value from the drop-down  

list. The press Apply and reboot the ICG-150 in order for the change to take effect.  

To modify the Wi-Fi setngs hover over Network then select WLAN.  

This page will allow you to configure the Wi-Fi interface. Note that these setngs will be  

different based on the type of interface you are configured as (AP versus client/staton).  

Change any desired setngs, then press Apply to save.  

Ethernet  

The ICG-150 has two Ethernet ports on the rear of the system, one is labeled WAN/LAN1 and  

the other is labeled LAN2. By default the WAN/LAN1 port is configured as the primary WAN  

and the LAN2 port is LAN with an IP address of 192.168.2.1.  

12  

©2022 Rev 1. Intwine Connect. All Rights Reserved. | +1(216)314-2922 | info@intwineconnect.com | intwineconnect.com  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	intwine connected ICG-150 Gateway 150 Cellular Router User Guide
Make	intwine connected
Language	English
Filetype	PDF (Download)
File size	0.51 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• intwine connected

Questions and Answers (0)

If you have any questions regarding intwine connected ICG-150 Gateway 150 Cellular Router User Guide, please ask here and describe the problem in detail.