SKIL RT1323-00 10 Amp Fixed Base Corded Router Owner’s Manual
Use the inflator only for its intended use. Do not alter or modify the unit from the
original design or function.
Always be aware that misuse and improper handling of this inflator can cause injury to
yourself and others.
Never leave an inflator unattended with the air hose attached.
Do not continue to use an inflator or hose that leaks air or does not function properly.
Always remove the battery pack before making adjustments, servicing an inflator, or
when an inflator is not in use.
Do not attempt to pull or carry the inflator by the hoses.
Do not use the inflator as a breathing device.
Never direct a jet of compressed air toward people or animals. Take care not to blow dust
and dirt towards yourself or others. Following this rule will reduce the risk of serious injury.
Protect your lungs. Wear a face or dust mask if the operation is dusty. Following this rule will
reduce the risk of serious personal injury.
Do not use this inflator to spray chemicals. Your lungs can be damaged by inhaling toxic
fumes.
Check damaged parts. Before further use of the inflator or air tool, a guard or other part that
is damaged should be carefully checked to determine that it will operate properly and perform
its intended function. Check for alignment of moving parts, binding of moving parts, breakage
of parts, mounting, and any other conditions that may affect its operation. A guard or other part
that is damaged should be properly repaired or replaced by a SKIL factory service center or
authorized SKIL service station. Following this rule will reduce the risk of shock, fire, or serious
injury.
Do not crush, drop or damage the battery pack. Do not use a battery pack or charger
that has been dropped or received a sharp blow. A damaged battery is subject to explosion.
Properly dispose of a dropped or damaged battery immediately.
Do not charge a battery tool in a damp or wet location. Following this rule will reduce the
risk of electric shock.
Allow pump to cool for five (5) minutes after each fifteen (15) minutes of continuous use.
Never block the inflating or deflating outlets while operating.
Save these instructions. Refer to them frequently and use them to instruct others who
may use this handheld inflator. If you loan someone this handheld inflator, loan them these
instructions also.
4
SYMBOLS
Safety Symbols
The purpose of safety symbols is to attract your attention to possible dangers. The safety
symbols and the explanations with them deserve your careful attention and understanding.
The symbol warnings do not, by themselves, eliminate any danger. The instructions and
warnings they give are no substitutes for proper accident prevention measures.
Be sure to read and understand all safety instructions in this Owner's
Manual, including all safety alert symbols such as “DANGER,”
WARNING
“WARNING,” and “CAUTION” before using this tool. Failure to following all instructions listed
below may result in electric shock, fire, and/or serious personal injury.
The definitions below describe the level of severity for each signal word. Please read the manual
and pay attention to these symbols.
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that follow this
symbol to avoid possible injury or death.
DANGER indicates a hazardous situation which, if not avoided, will
result in death or serious injury.
DANGER
WARNING indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
WARNING
CAUTION, used with the safety alert symbol, indicates a hazardous
situation which, if not avoided, will result in minor or moderate injury.
CAUTION
Damage Prevention and Information Messages
These inform the user of important information and/or instructions that could lead to equipment
or other property damage if they are not followed. Each message is preceded by the word
“NOTICE”, as in the example below:
NOTICE: Equipment and/or property damage may result if these instructions are not followed.
The operation of any power tools can result in
foreign
objects being thrown into your eyes, which can result
WARNING
in severe eye damage. Before beginning power tool operation, always
wear safety goggles or safety glasses with side shields and a full face
shield when needed. We recommend a Wide Vision Safety Mask for use
over eyeglasses or standard safety glasses with side shields.Always use
eye protection which is marked to comply withANSI Z87.1.
5
| General | Details |
|---|---|
| Name | SKIL RT1323-00 10 Amp Fixed Base Corded Router Owner’s Manual |
| Make | Skil |
| Language | English |
| Filetype | PDF (Download) |
| File size | 7.63 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding SKIL RT1323-00 10 Amp Fixed Base Corded Router Owner’s Manual, please ask here and describe the problem in detail.
TP-Link ER7212PC Omada 3-in-1 Gigabit VPN Router Owner’s Manual
QiXiang QX520 Dual SIM Router User Guide
ASUS TUF-AX4200 Dual Band WiFi Router User Guide
TP-Link AX3000 Wi-Fi 6 Air Router Installation Guide
Spectrum 20230810 WiFi 6E Wall Mounted Router User Guide
perle IRG5410 Router User Guide
TRENDnet TEW-929DRU Dual Band Wireless Gigabit Dual WAN VPN SMB Router Installation Guide
D-LINK DIR-827 HD 2000 Media Router Installation Guide
CNCU FC300 Easy Route CNC Router Instructions
ASUS TUF-BE6500 TUF Gaming Dual Band WiFi 7 Router User Guide