SKIL RT1323-00 10 Amp Fixed Base Corded Router Owner’s Manual
Under abusive conditions, liquid may be ejected from the
battery; avoid contact. If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or burns.
Do not use a battery pack or tool that is damaged or modified.
Damaged or modified batteries may exhibit unpredictable behaviour
resulting in fire, explosion or risk of injury.
Do not expose a battery pack or tool to fire or excessive
temperature. Exposure to fire or temperature above 265 °F may
cause explosion.
Follow all charging instructions and do not charge the battery
pack or tool outside the temperature range specified in the
instructions. Charging improperly or at temperatures outside the
specified range may damage the battery and increase the risk of
fire.
Service
Have your power tool serviced by a qualified repair person
using only identical replacement parts. This will ensure that the
safety of the power tool is maintained.
Never service damaged battery packs. Service of battery packs
should only be performed by the manufacturer or authorized service
providers.
Specific Safety Rules
Before using battery, read all instructions and cautionary
markings on (1) battery charger, (2) battery pack, and (3)
product using battery.
Risk of fire and burns. Do not recharge, disassemble, heat
above 100 °C(212 °F), or incinerate. Keep battery out of reach
of children and in original package until ready to use.
4
Battery tools do not have to be plugged into an electrical
outlet; therefore, they are always in operating condition. Be
aware of possible hazards when not using your battery tool or
when changing accessories.
Do not place battery tools or their batteries near fire or heat.
Charge battery pack within the required temperature range.
Store charger and battery pack in locations where temperature
is within the recommended storage temperature range. This is
important to prevent serious damage to the battery cells.
Do not crush, drop or damage the battery pack. Do not use a
battery pack or charger that has been dropped or received a
sharp blow. A damaged battery is subject to explosion. Properly
dispose of a dropped or damaged battery immediately.
Do not insert battery pack in charger if battery pack case is
cracked. Using damaged battery pack may result in electric shock
or fire.
Batteries vent hydrogen gas and can explode in the presence
of a source of ignition such as a pilot light. To reduce the risk
of serious personal injury, never use any cordless product in the
presence of open flame. An exploded battery can propel debris and
chemicals. If exposed, flush with water immediately.
Do not recharge battery in damp or wet environment. Do not
expose charger to rain or snow. Water entering battery charger
may result in electric shock or fire.
Do not store outside or in vehicles.
Do not store battery pack in charger. Battery pack stored in
charger over a long period of time could lead to battery pack
damage and fire.
5
Battery leakage may occur under extreme usage or temperature
conditions. Avoid contact with skin and eyes. The battery liquid
is caustic and could cause chemical burns to tissues. If liquid comes
in contact with skin, wash quickly with soap and water. If the liquid
contacts your eyes, flush them with water for a minimum of 10
minutes and seek medical attention.
Do not let gasoline, oils, petroleum-based products, etc. come
in contact with plastic parts. They contain chemicals that can
damage, weaken or destroy plastic.
Do not touch the uninsulated portion of output connector or
uninsulated battery terminal. There is a risk of electric shock.
Replace battery pack if a substantial drop in operating time per
charge is observed. Battery pack may be nearing the end of its
life.
6
SYMBOLS
Safety Symbols
The purpose of safety symbols is to attract your attention to
possible dangers. The safety symbols and the explanations with
them deserve your careful attention and understanding. The
symbol warnings do not, by themselves, eliminate any danger. The
instructions and warnings they give are no substitutes for proper
accident prevention measures.
Be sure to read and understand all safety
instructions in this Owner’s Manual, including
WARNING
all safety alert symbols such as “DANGER,” “WARNING,” and
“CAUTION” before using this tool. Failure to following all instructions
listed below may result in electric shock, fire, and/or serious
personal injury.
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to these
symbols.
This is the safety alert symbol. It is
used to alert you to potential personal
injury hazards. Obey all safety
messages that follow this symbol to
avoid possible injury or death.
DANGER indicates a hazardous
situation which, if not avoided, will
result in death or serious injury.
DANGER
WARNING indicates a hazardous
situation which, if not avoided, could
result in death or serious injury.
WARNING
7
| General | Details |
|---|---|
| Name | SKIL RT1323-00 10 Amp Fixed Base Corded Router Owner’s Manual |
| Make | Skil |
| Language | English |
| Filetype | PDF (Download) |
| File size | 7.63 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding SKIL RT1323-00 10 Amp Fixed Base Corded Router Owner’s Manual, please ask here and describe the problem in detail.
NETGEAR RAX10 AX1800 WiFi 6 Router User Guide
Yeacomm NR610 Outdoor 5g 4g Modem Odu Dual Sim Router Owner’s Manual
Trueview T18168-AE Wireless Router 4G 5G Mobile Sim Based Router User Guide
GEWISS GW A9707 KNX/IP Router Installation Guide
NETGEAR RAX36 Nighthawk AX4 4-Stream AX3000 Wi-Fi Router Owner’s Manual
VOX FTTB Mikrotik Router Installation Guide
D-Link AX3200 Smart Router Owner’s Manual
eero Outdoor 7 Dual Band Mesh Wi-fi Router Installation Guide
TP-Link Archer BE800 BE19000 Tri-Band Wi-Fi 7 Router Installation Guide
Cudy WR3000 AX3000 Wi-Fi 6 Mesh Router User Guide