SKIL RT1323-00 10 Amp Fixed Base Corded Router Owner’s Manual
MAINTENANCE
To avoid serious personal injury, always remove the battery pack
from the tool when cleaning or performing any maintenance.
WARNING
Service
Preventive maintenance performed by unauthorized personnel may
result in misplacement of internal wires and components which could
cause serious hazard. We recommend that all tool service be performed by a SKIL Factory
WARNING
Service Center or Authorized SKIL Service Station.
General Maintenance
When servicing, use only identical replacement parts. Use of any
other parts could create a hazard or cause product damage.
WARNING
Periodically inspect the entire product for damaged, missing, or loose parts such as screws,
nuts, bolts, caps, etc. Securely tighten all fasteners and caps and do not operate this product
until all missing or damaged parts are replaced. Please contact customer service or an
authorized service center for assistance.
Cleaning
The tool may be cleaned most effectively with compressed dry air. Always
wear safety goggles when cleaning tools with compressed air.
Ventilation openings and switch levers must be kept clean and free of foreign matter. Do not
WARNING
attempt to clean by inserting pointed objects through openings.
Certain cleaning agents and solvents damage plastic parts. Some of
these are: gasoline, carbon tetrachloride, chlorinated cleaning solvents,
ammonia and house hold detergents that contain ammonia.
WARNING
Storage
Store the tool indoors in a place that is inaccessible to children. Keep away from corrosive
agents.
TROUBLESHOOTING
Problem
Cause
Remedy
Tool does not work.
1. Battery pack is depleted.
1. Charge the battery pack.
2. Battery pack is not installed 2. Confirm that the battery pack
properly.
is locked and secured to the
tool.
3. Have the switch replaced by
an Authorized SKIL Service
Center or Service Station.
3. Burned out switch.
Strong vibration or loud
noise during operation.
Accessory is not installed
securely.
Reinstall the accessory
according to “Installing and
Removing Accessories”
The Halo light flashes
rapidly.
The tool has stopped working Turn the tool OFF, wait for the
to protect internal circuits from tool to cool down, then start the
overheating.
tool again.
The Halo light flashes
Low battery.
Charge the battery.
slowly.
22
| General | Details |
|---|---|
| Name | SKIL RT1323-00 10 Amp Fixed Base Corded Router Owner’s Manual |
| Make | Skil |
| Language | English |
| Filetype | PDF (Download) |
| File size | 7.63 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding SKIL RT1323-00 10 Amp Fixed Base Corded Router Owner’s Manual, please ask here and describe the problem in detail.
Cisco Router RV345/RV345P User Guide
HUAWEI WS880 802.11ac Wireless Router User Guide
Actiontec WF-815 Tri-Band Wi-Fi6E Router Owner’s Manual
ZTE MF920U 4G LTE Wireless Router User Guide
SEALEY CP20VTR Cordless Trimming Router Instruction Manual
Cudy WR3000H 2.5G Mesh Wi-Fi 6 Router Installation Guide
MikroTik hAP ax³ Wireless Network Router User Manual
ASUS AX7800 Tri Band WiFi Router User Guide
RANGEXTD RJ45 WIFI Router User Guide
robustel R3000 Lite Dual-SIM VPN Router User Manual