SKIL RT1323-00 10 Amp Fixed Base Corded Router Owner’s Manual
Fig. 6
Bevel Adjustment (Fig.6)
Your tool is equipped with a bevel-adjustment
knob for adjusting the cutting angle.
a. Detach the battery pack from the tool.
b. Loosen the bevel-adjustment knob by
rotating the knob counterclockwise.
c. Tilt the foot until the bevel-indicator mark
reaches the desired setting on the bevel
gauge.
Indicator
Mark
Bevel-Adjust-
ment Knob
d. Securely tighten the bevel-adjustment knob
by rotating the knob clockwise.
Attempting to make bevel
WARNING
cuts without the bevel-ad-
justment knob securely tightened can result
in serious injury.
Because of the increased amount of blade engagement in the work
and decreased stability of the foot, blade binding may occur during a
WARNING
bevel cut. Keep the saw steady and the foot firmly on the workpiece.
NOTICE:
•
•
When bevel cutting, the depth of cut will not correspond with value on the depth of cut gauge.
Since the blade thicknesses vary and different angles require different settings, always make
a trial cut in scrap material along a guideline to determine how much you should offset the
guideline on the workpiece to be cut.
0° Bevel Check and Adjustment (Fig.7)
Your tool has a 0° bevel stop, which has been adjusted before shipment to assure that the
blade is vertical to the foot at 0°bevel cutting.
Fig. 7
Carpenter’s Square
Blade
Foot
0° Bevel Stop
Adjusting
Screw
To check and adjust to 0° Bevel:
a. Detach the battery pack from the tool.
b. Set the foot to the maximum depth-of-cut setting.
c. Loosen the bevel-adjustment knob.
d. Set the saw to 0° bevel on the bevel gauge and retighten the bevel-adjustment knob.
e. Turn the saw upside down and place it on a stable surface. Use a square to check for an
angle of 90° between the blade and the underside of the foot.
16
| General | Details |
|---|---|
| Name | SKIL RT1323-00 10 Amp Fixed Base Corded Router Owner’s Manual |
| Make | Skil |
| Language | English |
| Filetype | PDF (Download) |
| File size | 7.63 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding SKIL RT1323-00 10 Amp Fixed Base Corded Router Owner’s Manual, please ask here and describe the problem in detail.
perle IRG5541+ FirstNet LTE Router User Guide
MikroTik RB750r2 hEX Lite Router User Guide
ASUS RT-AX59U Dual Band WiFi 6 AiMesh Router User Guide
MOFI NETWORK MOFI6500 4G LTE Router User Manual
verizon CR1000 Access Point Router Instructions
PREDATOR W6X Connect W6x Wi-Fi 6 Router Owner’s Manual
FiberHome SR1021Y Wireless Router User Manual
airlive XPON ONU Wifi6 MESH Router User Manual
ARRIS M6 Wireless Router User Manual
POOLEX WIFI-LINK Outdoor Wifi Antenna and 4G Router Instruction Manual