×
- 1. The Html Code Provided Does Not Contain Any Subheadings Related To Installation/setup/configuration. Therefore, I Will Take The First Senten… (User Guide 4g+ Cat6 Ac1200 Wireless Dual Band Gigabit Router 2022 Tp-link Rev1.0.0 1910013017)
- 2. About This Guide (Connect The Hardware → Requirements For Operation → Position Your 4g Lte Router → Connect Your 4g Lte Router → Log In To Your 4g Lte Router → Set Up Internet Connections)
- 3. Product Overview (Panel Layout)
- 4. Get To Know Your 4g Lte Router (Product Overview → Panel Layout → Top View → Led Explanation)
- 5. Get To Know Your 4g Lte Router (Connect Your 4g Lte Router → The Back Panel)
- 6. Get To Know Your 4g Lte Router (Power Port → Power On/off Button → Lan1, Lan2, Lan3, Lan4/wan → Wps/reset → Wi-fi On/off → Nano Sim Card Slot)
- 7. Connect The Hardware (Requirements For Operation → Position Your 4g Lte Router → Connect Your 4g Lte Router)
- 8. Connect The Hardware (Requirements For Operation → Position Your 4g Lte Router)
- 9. Connect The Hardware (Connect Your 4g Lte Router → Install The Antennas And Position Them Upwards. → Connect The Power Adapter And Push In The Power On/off Button To Turn On The Router. → Connect Your Computer To The Router. → Method 1: Wired → Method 2: Wirelessly)
- 10. Connect The Hardware (G → Wlan → Tp-link_home → My Network → Home Network → Tp-link_network)
- 11. Log In To Your 4g Lte Router
- 12. Log In To Your 4g Lte Router (Warning: Ensure Tcp/ip Protocol Is Set To Obtain An Ip Address Automatically → Launch A Web Browser → Set A Strong Password)
- 13. Set Up Internet Connections (Use Quick Setup Wizard → Create A Connection Profile → Set Up Ipv6 Tunnel → Test Internet Connectivity)
- 14. Set Up Internet Connections (Use Quick Setup Wizard → Create A Connection Profile)
- 15. Set Up Internet Connections (Upgrade Your Isp Information → Network Mode → Band Setting → Network Search → Create Profile → Profile Name, Username And Password)
- 16. Set Up Internet Connections (Set Up Ipv6 Tunnel → Use The Public Ipv6 Tunnel Service-6to4)
- 17. Set Up Internet Connections (Specify The 6rd Tunnel With Parameters Provided By Your Isp → Test Internet Connectivity)
- 18. Set Up Internet Connections (Diagnostics)
- 19. Qos
- 20. Enableqosandsetbandwidthallocation (Addamiddlepriorityqosruleforthephone → Qossettings → Natboost → Inputmaximumuploadanddownloadbandwidth → Setbandwidthprioritypercentage → Savesettings)
- 21. Qos
- 22. Protect The Network From Cyber Attacks (Service Filtering → Access Control → Ip & Mac Binding → Ipv6 Firewall)
- 23. Protect The Network From Cyber Attacks (Configure Firewall And Dos Protection → Enable Ipv4 Spi Firewall → Enable Dos Protection → Set The Level Of Protection For Icmp-flood Attack Filtering → Set The Level Of Protection For Udp-flood Attack Filtering → Set The Level Of Protection For Tcp-flood Attack Filtering)
- 24. Network Security (Service Filtering → Visit Http://tplinkmodem.net → Go To Advanced > Security > Service Filtering → Click Add → Select A Service Type From The Drop-down List → Specify The Ip Address(es) That This Filtering Rule Will Apply To)
- 25. Network Security (Access Control → Block Or Allow Specific Client Devices To Access My Network → Visit Http://tplinkmodem.net, And Log In With The Password Or Your Tp-link Id → Go To Advanced > Security > Access Control And Enable Access Control → Select The Access Mode To Either Block (recommended) Or Allow The Device(s) In The List → Select Blacklist And Click Save)
- 26. Network Security (Ip & Mac Binding → Prevent Arp Spoofing And Other Arp Attacks → Visit Http://tplinkmodem.net, And Log In With The Password Or Your Tp-link Id → Go To Advanced > Security > Ip & Mac Binding And Enable Ip & Mac Binding)
- 27. Bind Your Device(s) According To Your Needs (Bind The Connected Device(s) → Bind The Unconnected Device → Ipv6 Firewall)
- 28. Network Security (Ipv6 Firewall → Add → Interface Name → Scan → Service Type → Enable This Entry)
- 29. Parental Controls
- 30. Parental Controls (Control The Time Of Day My Children Or Other Home Network Users Are Allowed To Access The Internet → Visit Http://tplinkmodem.net, And Log In With The Password Or Your Tp-link Id → Go To Basic Or Advanced > Parental Controls And Enable Parental Controls → Click Add)
- 31. Parental Controls (Click Scan And Select The Device To Be Controlled. Or Enter The Device Name And Mac Address Manually. → Select The Restriction Type. → With Blacklist Selected, The Controlled Devices Cannot Access Any Websites Containing The Specified Keywords During The Effective Time Period. → With Whitelist Selected, The Controlled Devices Can Only Access Websites Containing The Specified Keywords During The Effective Time Period. → Click Add A New Keyword. You Can Add Up To 200 Keywords For Both Blacklist And Whitelist.)
- 32. Parental Controls (Whitelist → Save)
- 33. View Messages (Edit And Send A New Message → View Sent Messages → View Drafts → Sms Settings)
- 34. View Messages (Edit And Send A New Message)
- 35. View Sent Messages (View Drafts → Sms Settings)
- 36. Message Center Number (Change It According To Your Needs → Click Save To Apply Your Settings)
- 37. Create A Network For Guests (Customize Guest Network Options)
- 38. Create A Network For Guests (Customize Guest Network Options)
- 39. Guest Network (Allow Guests To See Each Other → Allow Guests To Access My Local Network → Enable Qos For Guest Network)
- 40. Nat Forwarding (Translate Address And Port By Alg → Share Local Resources In The Internet By Virtual Server → Open Ports Dynamically By Port Triggering → Make Applications Free From Port Restriction By Dmz → Make Xbox Online Games Run Smoothly By Upnp)
- 41. Nat Forwarding (Translate Address And Port By Alg → Share Local Resources In The Internet By Virtual Server)
- 42. Nat Forwarding (Assign A Static Ip Address To Your Pc → Visit Http://tplinkmodem.net → Go To Advanced > Nat Forwarding > Virtual Servers → Click Save To Save The Settings)
- 43. Nat Forwarding (Set Up A Dynamic Dns Service Account → Open Ports Dynamically By Port Triggering → Configure The Port Triggering Rules)
- 44. Nat Forwarding (Make Applications Free From Port Restriction By Dmz → Assign A Static Ip Address To Your Pc → Visit Http://tplinkmodem.net → Go To Advanced > Nat Forwarding > Dmz → Enter The Ip Address In The Dmz Host Ip Address Field)
- 45. Nat Forwarding
- 46. Nat Forwarding (Upnp → Lan → Wan → Xbox → G Lte Router)
- 47. Specifyyournetworksettings (Upgradeyourispinformation → Pinmanagement → Datasettings → Lansettings → Wirelesssettings → Setupadynamicdnserviceaccount)
- 48. Specifyyournetworksettings (Upgradeyourispinformation → Pinmanagement)
- 49. Specifyyournetworksettings (Datasettings → Simcardstatus → Pinlock → Auto-unlockpin → Puk → Newpin)
- 50. Specifyyournetworksettings (Lansettings → Changethelanipaddress → Enabledatalimit → Entertotalmonthlydata → Enterusagealert → Enablemonthlydatastatistics)
- 51. Specifyyournetworksettings (Use The4glterouterasadhcpserver → Configuredhcpserverfunction → Specifytheipaddresspool → Enteravaluefortheaddressleasetime → Keeprestofsettingsasdefault → Clicksavetomakesettingseffective)
- 52. Specifyyournetworksettings (Reservelanipaddresses → Enabledhcpfeature → Configureaddressreservation → Visithttp://tplinkmodem.net → Gotoadvanced>network>lansettings → Addaddressreservationentry)
- 53. Specify Your Network Settings (Wireless Settings → Specify Basic Wireless Settings)
- 54. Specifyyournetworksettings (Changethemodeorchannel → Changethesecurityoption → Hidessid → Mode → Channel → Transmitpower)
- 55. Specifyyournetworksettings (Usewpsforwirelessconnection → Method1usethewi-fiprotectedsetupbutton → Method2entertheclientdevicespinontherouter)
- 56. Specifyyournetworksettings (Method3 → Scheduleyourwirelessfunction)
- 57. Specifyyournetworksettings (Setsystemtime → Viewwirelessinformation)
- 58. Specifyyournetworksettings (Advancedwirelesssettings → Beaconinterval → Rtsthreshold → Dtiminterval)
- 59. Specifyyournetworksettings (Setupadynamicdnsserviceaccount → Groupkeyupdateperiod → Wmm → Shortgi → Apisolation)
- 60. Specifyyournetworksettings
- 61. Specifyyournetworksettings (Createstaticroutes → Makesuretheroutersusedifferentlanipaddresses → Disabledhcpfunctionofrouter2 → Visithttp://tplinkmodem.net → Gotoadvancednetworkstaticrouting → Clickaddtoaddanewstaticroutingentry)
- 62. Specifyyournetworksettings (Set Up A Vpn Connection)
- 63. Specifyyournetworksettings (Useopenvpntoaccessyourhomenetwork → Step1.setupopenvpnserveronyourrouter)
- 64. Specifyyournetworksettings (Configureopenvpnconnectiononyourremotedevice → Setuppptpvpnserveronyourrouter)
- 65. Specifyyournetworksettings (Configurepptpvpnconnectiononyourremotedevice → Warning:beforeyouenablevpnserver,werecommendyouconfiguredynamicdnsservice(recommended)orassignastaticipaddressforrouterswanport.)
- 66. Specifyyournetworksettings (Connecttoaworkplace → Usemyinternetconnection(vpn) → Entertheinternetipaddressofthe Router)
- 67. Specifyyournetworksettings
- 68. Specifyyournetworksettings (Ussd → Visithttp://tplinkmodem.net, And Login With The Password Or Your Tp-link Id. → Go Toadvanced>network>ussdpage. → Enter The Ussd Request And Clicksend. → You Will See The Message Returned From Thecarrier In Theussd Resultbox.)
- 69. Set System Time (Control Leds → Test The Network Connectivity → Update The Firmware → Back Up And Restore Configuration Settings → Set The Router To Reboot Regularly → Change The Administrator Account)
- 70. Set System Time (Configure The System Time Using The Following Methods → Manually → Get From Pc → Get From The Internet → Daylight Saving)
- 71. Control Leds (Test The Network Connectivity)
- 72. Update The Firmware (Online Upgrade)
- 73. Online Upgrade (Local Upgrade → Back Up And Restore Configuration Settings)
- 74. To Restore Configuration Settings: (To Reset The Router To Factory Default Settings: → Set The Router To Reboot Regularly)
- 75. Administrate Your Network (Reboot Manually → Schedule The Reboot Time → Change The Administrator Account)
- 76. Local Management (Administrate Your Network → Enable Local Management Via Https → Specify The Local Management → Allow The Following Ip/mac → Click Save To Make The Settings Effective)
- 77. Remote Management (Enable Remote Management → Port Settings → Specific Device Management → Save Settings → Wan Ip Address → Dynamic Dns Service Account)
- 78. Administrate Your Network (System Log → To View The System Logs → To Save The System Logs)
- 79. Administrate Your Network (Save Locally → Save Remotely)
- 80. Cwmp Settings (Enable Cwmp → Inform → Inform Interval → Acs Url → Acs Username/password → Interface Used By Tr-069 Client)
- 81. Connectionrequestauthentication (Username/password → Path → Port → Url → Getrpcmethods → Snmpsettings)
- 82. Enablesnmpagent/snmpagentforwan (Read-onlycommunity → Writecommunity → Systemname → Systemdescription → Systemlocation → Systemcontact)
- 83. Administrateyournetwork (Monitor Theinternettrafficstatistics → Visithttp://tplinkmodem.net → Go Toadvanced>systemtools>trafficmonitorpage → Toggleontrafficmonitor)
- 84. Register A Tp-link Id (Change Your Tp-link Id Information → Manage The User Tp-link Ids → Manage The Router Via The Tp-link Tether App)
- 85. Register A Tp-link Id (Change Your Tp-link Id Information)
- 86. Tp-link Cloud Service (Manage The User Tp-link Ids → Change Your Password)
- 87. Add Tp-link Id To Manage The Router (Remove Tp-link Id(s) From Managing The Router)
- 88. Manage The Router Via The Tp-link Tether App (Launch The Apple App Store Or Google Play Store → Connect Your Device To The Routers Wireless Network → Log In With Your Tp-link Id → Register A Tp-link Id)
- 89. Set Up A Onemesh Network (Manage Devices In The Onemesh Network)
- 90. Onemesh With Seamless Roaming (Unified Wi-fi Network → Seamless Roaming → Easy Setup And Management → Unified Onemesh Network → Same Network Name & Password)
- 91. Set Up A Onemesh Network (Warning: Ensure The Extender Is Connected To The Router. → Tips: Enable Smart Connect Feature For Seamless Connection. → Connect Onemesh Extenders To The Router → Check Devices In Onemesh Network → Visit Tp-link Compatibility Page → Log In To Tp-link Router Management Page)
- 92. Onemesh With Seamless Roaming (Manage Devices In The Onemesh Network)
- 93. Onemesh With Seamless Roaming (Manage Each Onemesh Device In The Network → Device Info Page)
- 94. Resetting The Router To Factory Default Settings (Web Management Page Password → Wireless Network Password → Tp-link Id Password → Accessing The Web Management Page)
- 95. Go To Start > Control Panel > Network And Internet, And Click View Network Status And Tasks.
- 96. Restore Advanced Settings (Reset The Router To Factory Default Settings → Verify That Your Sim Card Is An Lte Or Wcdma Card → Verify That Your Sim Card Is In Your Isps Service Area → Verify That Your Sim Card Has Sufficient Credit → Check The Lan Connection → Check Your Isp Parameters)
- 97. Check The Pin Settings (Check The Data Limit → Check The Mobile Data → Check The Data Roaming → Verify Internet Parameters)
- 98. How To Use The Router As A Regular Wireless Router To Share My Internet? (Connect Your Routers Lan4/wan Port To The Modem Or The Network Port. → Visit Http://tplinkmodem.net, And Log In With Password You Set For The Router. → Go To Advanced > Operation Mode Page. → Select The Wireless Router Mode Option And Click Save To Make The Settings Effective. → G/4g Backup → Iptv Configuration)
- 99. Make Sure The Wireless Function Is Enabled (Make Sure The Wireless Adapter Driver Is Installed Successfully → Troubleshooting On Windows 7 → Troubleshooting On Windows Xp)
- 100. Exit The Wireless Configuration Tool (Select And Right Click On My Computer → Expand Services And Applications > Services → Find And Locate Wireless Zero Configuration → Select Wireless Zero Configuration And Right Click It)
- 101. Changestartuptypetoautomatic (Connecttowirelessnetwork → Checkthewlanledindicatoronyourrouter → Makesureyourcomputer/deviceisstillintherangeofyourrouter/modem)
- 102. Go Toadvanced>wireless>advancedsettingspage, And Check The Wirelessrouter Settings. Double Check Your Wireless Network Name, And Make Sure T… (Connect To Wireless Network. → Authenticating Problem, Password Mismatch. → Sometimes It Will Ask You To Type In A Pin Number When You Connect To Thewireless Network For The First Time. → If You Cannot Find The Pin Or Pin Failed, You May Chooseconnecting Using Asecurity Key Instead, And Then Type In The Network Security Key/wirelesspassword; → If It Continues Saying Network Security Key Mismatch, It Is Suggested To Confirmthe Wireless Password On Your Wireless Router/modem; → Note: Wireless Password/network Security Key Is Case-sensitive.)
- 103. Connect To Wireless Network (Check The Wireless Signal Strength Of Your Network → Change The Wireless Channel Of The Router → Re-install Or Update The Driver For Your Wireless Adapter)
- 104. Ce Mark Warning (Eu Declaration Of Conformity → Uk Declaration Of Conformity → Rf Exposure Information → National Restrictions)
- 105. Ncc Notice (Bsmi Notice → 安全諮詢及注意事項 → 注意潮請勿將水或其他液體潑灑到本產品上 → 插槽與開口供通風使用以確保本產品的操作可靠並防止過熱 → 請勿將本產品置放於靠近熱源的地方 → 不要私自拆開機殼或自行維修如產品有故障請與原廠或代理商聯繫)
- 106. Restricted Substances And Its Chemical Symbols (Safety Information)
- 107. Environment (Explanation Of The Symbols On The Product Label → Caution → Operator's Manual → Recycling)
×
TP-Link Archer MR500 AC1200 Wireless Dual Band Gigabit Router User Guide
Chapter 13
TP-Link Cloud Service
• Add/remove other TP-Link IDs to/from the router.
13 3 1 Add TP-Link ID to Manage the Router
1. Visit http://tplinkmodem.net, and log in with your TP-Link ID.
2. Go to Basic > TP-Link Cloud, and focus on the Bound Accounts section.
3. Click
, enter another TP-Link ID as needed and click Save.
Note:
If you need another TP-Link ID, please register a new one via the Tether app.Please refer to Manage the Router via the
TP-Link Tether App to install the app and register a new TP-Link ID.
4. The new TP-Link ID will be displayed in the Bound Accounts table as a User.
13 3 2 Remove TP-Link ID(s) from Managing the Router
1. Visit http://tplinkmodem.net, and log in with your TP-Link ID.
2. Go to Basic > TP-Link Cloud, and focus on the Bound Accounts section.
3. Tick the checkbox(es) of the TP-Link ID(s) you want to remove and click Unbind.
86
| General | Details |
|---|---|
| Name | TP-Link Archer MR500 AC1200 Wireless Dual Band Gigabit Router User Guide |
| Make | TP-Link |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.32 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding TP-Link Archer MR500 AC1200 Wireless Dual Band Gigabit Router User Guide, please ask here and describe the problem in detail.
TP-Link T150500-2-DT WiFi Router Instruction Manual
TP-Link Archer AX55 Wi-Fi 6 Router Installation Guide
TP-Link VR300 Archer Modem Router User Guide
TP-Link Omada ER8411 VPN Router Instructions
TP-Link Configure VDSL Router User Guide
TP-Link Archer BE805 BE19000 Tri-Band Wi-Fi 7 Router User Manual
TP-Link VR600 Wireless DSL Modem Router Installation Guide
TP-Link AX58 Dual Band Gigabit Wi-Fi 6 Router Installation Guide
TP-Link AC750 Wireless Dual Band Router Owner’s Manual
TP-Link AX6000 8-Stream Wi-Fi 6 Router Installation Guide
ALTA LABS ROUTE10 High Performance 10 Gbps Router User Guide
CONTEMPORARY CONTROLS BASRTSX-B Multi Network Router Installation Guide
TELTONIKA RUT955 LTE Router User Guide
ASUS ZenWiFi BE3600 Dual Band Wi-Fi Router User Guide
TP-Link Archer MR200 Wireless Dual Band 4G LTE Router User Guide
Verizon GT784 Gateway Router User Guide
ASUS RT-BE88U Dual Band WiFi 7 Gaming Router User Guide
ASUS WL500W Wireless Router Instructions
CARRY CDA3-20 M4 Mesh Wi-Fi Router User Guide
westermo MRD-455-NA Cellular Router User Guide
Table of Contents
- 1. The Html Code Provided Does Not Contain Any Subheadings Rela... →
- 2. About This Guide - Connect The Hardware →
- 3. Product Overview - Panel Layout →
- 4. Get To Know Your 4g Lte Router - Product Overview →
- 5. Get To Know Your 4g Lte Router - Connect Your 4g Lte Router →
- 6. Get To Know Your 4g Lte Router - Power Port →
- 7. Connect The Hardware - Requirements For Operation →
- 8. Connect The Hardware - Requirements For Operation →
- 9. Connect The Hardware - Connect Your 4g Lte Router →
- 10. Connect The Hardware - G →
- 11. Log In To Your 4g Lte Router →
- 12. Log In To Your 4g Lte Router - Warning: Ensure Tcp/ip Protoc... →
- 13. Set Up Internet Connections - Use Quick Setup Wizard →
- 14. Set Up Internet Connections - Use Quick Setup Wizard →
- 15. Set Up Internet Connections - Upgrade Your Isp Information →
- 16. Set Up Internet Connections - Set Up Ipv6 Tunnel →
- 17. Set Up Internet Connections - Specify The 6rd Tunnel With Pa... →
- 18. Set Up Internet Connections - Diagnostics →
- 19. Qos →
- 20. Enableqosandsetbandwidthallocation - Addamiddlepriorityqosru... →
- 21. Qos →
- 22. Protect The Network From Cyber Attacks - Service Filtering →
- 23. Protect The Network From Cyber Attacks - Configure Firewall ... →
- 24. Network Security - Service Filtering →
- 25. Network Security - Access Control →
- 26. Network Security - Ip & Mac Binding →
- 27. Bind Your Device(s) According To Your Needs - Bind The Conne... →
- 28. Network Security - Ipv6 Firewall →
- 29. Parental Controls →
- 30. Parental Controls - Control The Time Of Day My Children Or O... →
- 31. Parental Controls - Click Scan And Select The Device To Be C... →
- 32. Parental Controls - Whitelist →
- 33. View Messages - Edit And Send A New Message →
- 34. View Messages - Edit And Send A New Message →
- 35. View Sent Messages - View Drafts →
- 36. Message Center Number - Change It According To Your Needs →
- 37. Create A Network For Guests - Customize Guest Network Option... →
- 38. Create A Network For Guests - Customize Guest Network Option... →
- 39. Guest Network - Allow Guests To See Each Other →
- 40. Nat Forwarding - Translate Address And Port By Alg →
- 41. Nat Forwarding - Translate Address And Port By Alg →
- 42. Nat Forwarding - Assign A Static Ip Address To Your Pc →
- 43. Nat Forwarding - Set Up A Dynamic Dns Service Account →
- 44. Nat Forwarding - Make Applications Free From Port Restrictio... →
- 45. Nat Forwarding →
- 46. Nat Forwarding - Upnp →
- 47. Specifyyournetworkse... - Upgradeyourispinform... →
- 48. Specifyyournetworkse... - Upgradeyourispinform... →
- 49. Specifyyournetworkse... - Datasettings →
- 50. Specifyyournetworkse... - Lansettings →
- 51. Specifyyournetworkse... - Use The4glterouterasadhc... →
- 52. Specifyyournetworkse... - Reservelanipaddresse... →
- 53. Specify Your Network Settings - Wireless Settings →
- 54. Specifyyournetworkse... - Changethemodeorchann... →
- 55. Specifyyournetworkse... - Usewpsforwirelesscon... →
- 56. Specifyyournetworkse... - Method3 →
- 57. Specifyyournetworkse... - Setsystemtime →
- 58. Specifyyournetworkse... - Advancedwirelesssett... →
- 59. Specifyyournetworkse... - Setupadynamicdnsserv... →
- 60. Specifyyournetworkse... →
- 61. Specifyyournetworkse... - Createstaticroutes →
- 62. Specifyyournetworkse... - Set Up A Vpn Connection →
- 63. Specifyyournetworksettings - Useopenvpntoaccessyourhomenetwo... →
- 64. Specifyyournetworksettings - Configureopenvpnconnectiononyou... →
- 65. Specifyyournetworksettings - Configurepptpvpnconnectiononyou... →
- 66. Specifyyournetworkse... - Connecttoaworkplace →
- 67. Specifyyournetworkse... →
- 68. Specifyyournetworkse... - Ussd →
- 69. Set System Time - Control Leds →
- 70. Set System Time - Configure The System Time Using The Follow... →
- 71. Control Leds - Test The Network Connectivity →
- 72. Update The Firmware - Online Upgrade →
- 73. Online Upgrade - Local Upgrade →
- 74. To Restore Configuration Settings: - To Reset The Router To ... →
- 75. Administrate Your Network - Reboot Manually →
- 76. Local Management - Administrate Your Network →
- 77. Remote Management - Enable Remote Management →
- 78. Administrate Your Network - System Log →
- 79. Administrate Your Network - Save Locally →
- 80. Cwmp Settings - Enable Cwmp →
- 81. Connectionrequestaut... - Username/password →
- 82. Enablesnmpagent/snmp... - Read-onlycommunity →
- 83. Administrateyournetwork - Monitor Theinternettrafficstatisti... →
- 84. Register A Tp-link Id - Change Your Tp-link Id Information →
- 85. Register A Tp-link Id - Change Your Tp-link Id Information →
- 86. Tp-link Cloud Service - Manage The User Tp-link Ids →
- 87. Add Tp-link Id To Manage The Router - Remove Tp-link Id(s) F... →
- 88. Manage The Router Via The Tp-link Tether App - Launch The Ap... →
- 89. Set Up A Onemesh Network - Manage Devices In The Onemesh Net... →
- 90. Onemesh With Seamless Roaming - Unified Wi-fi Network →
- 91. Set Up A Onemesh Network - Warning: Ensure The Extender Is C... →
- 92. Onemesh With Seamless Roaming - Manage Devices In The Onemes... →
- 93. Onemesh With Seamless Roaming - Manage Each Onemesh Device I... →
- 94. Resetting The Router To Factory Default Settings - Web Manag... →
- 95. Go To Start > Control Panel > Network And Internet, And Clic... →
- 96. Restore Advanced Settings - Reset The Router To Factory Defa... →
- 97. Check The Pin Settings - Check The Data Limit →
- 98. How To Use The Router As A Regular Wireless Router To Share ... →
- 99. Make Sure The Wireless Function Is Enabled - Make Sure The W... →
- 100. Exit The Wireless Configuration Tool - Select And Right Clic... →
- 101. Changestartuptypetoa... - Connecttowirelessnet... →
- 102. Go Toadvanced>wireless>advancedsettingspage, And Check The W... →
- 103. Connect To Wireless Network - Check The Wireless Signal Stre... →
- 104. Ce Mark Warning - Eu Declaration Of Conformity →
- 105. Ncc Notice - Bsmi Notice →
- 106. Restricted Substances And Its Chemical Symbols - Safety Info... →
- 107. Environment - Explanation Of The Symbols On The Product Labe... →