Home > UBIQUITI NETWORKS > UBIQUITI NETWORKS 2.4GHz Air Router User Guide

UBIQUITI NETWORKS 2.4GHz Air Router User Guide

AirRouter User Guide  
Chapter 3: AirOS™  
The SNMP Agent provides an interface for device  
monitoring using the Simple Network Management  
Protocol (an application layer protocol that facilitates the  
exchange of management information between network  
devices). SNMP Agent allows network administrators to  
monitor network performance, find and solve network  
problems. For the purpose of equipment identification,  
it is always a good idea to configure SNMP agents with  
contact and location information:  
Enable SSH Server This option enables SSH access to the  
AirRouter.  
Server Port SSH service TCP/IP port setting.  
Enable Password Authentication When enabled, you  
must authenticate using Administrator credentials in  
order to grant SSH access to the device, otherwise an  
Authentication Key will be required.  
Authorized Keys Click Edit to import a public key file  
working to get SSH access to the device instead of using  
an admin password. Click Browse to locate and select  
the key file, then click Import. Click Save to save your  
changes or Close to discard your changes.  
Telnet Server  
The following Telnet Server parameters can be set:  
Enable SNMP Agent Enables the SNMP Agent.  
SNMP Community Specify the SNMP community  
string. It is required to authenticate access to MIB  
objects and functions as an embedded password. The  
device supports a Read-only community string that  
gives read access to authorized management stations to  
all the objects in the MIB except the community strings,  
but does not allow write access. The AirRouter supports  
SNMP v1. The default SNMP Community is public.  
Enable Telnet Server This option activates the Telnet  
access to the AirOS Device.  
Server Port Telnet service TCP/IP port setting.  
NTP Client  
Contact Specify the contact who that should be  
notified in case an emergency situation arises.  
The Network Time Protocol (NTP) is a protocol for  
synchronizing the clocks of computer systems over  
packet-switched, variable-latency data networks. It can  
be used to set the AirRouter system time. System Time  
is reported next to the every System Log entry while  
registering system events if the Log option is enabled.  
Location Specify the physical location of the device.  
Web Server  
Enable NTP Client Enables the AirRouter to obtain the  
The following Web Server parameters can be set:  
system time from a time server on the Internet.  
Use Secure Connection (HTTPS) If checked Web server  
will use secure HTTPS mode. HTTPS mode is unchecked by  
default.  
NTP Server Specify the IP address or domain name of  
the NTP Server.  
Secure Server Port Defines the Web Server TCP/IP port  
Use Secure Connection (HTTPS) is enabled.  
System Log  
Server Port Web Server TCP/IP port setting while using  
HTTP mode.  
Session timeout Specifies the maximum timeout before  
the session expires. Once a session expires, you must login  
again using the username and password.  
Enable Log This option enables the registration routine  
of the system log messages. By default it is disabled.  
SSH Server  
Enable Remote Log Enables the syslog remote sending  
function while System log messages are sent to a  
remote server specified in the Remote Log IP Address and  
Remote Log Port fields.  
The following SSH Server parameters can be set:  
- Remote Log IP Address The host IP address where  
syslog messages should be sent. Remote host should  
be configured properly to receive syslog protocol  
messages.  
Ubiquiti Networks, Inc.  
28  
GeneralDetails
NameUBIQUITI NETWORKS 2.4GHz Air Router User Guide
MakeUBIQUITI NETWORKS
LanguageEnglish
FiletypePDF (Download)
File size5.15 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

If you have any questions regarding UBIQUITI NETWORKS 2.4GHz Air Router User Guide, please ask here and describe the problem in detail.

Leave a Reply

Your email address will not be published. Required fields are marked *

4 × two =

UBIQUITI NETWORKS ER-12 10 Port Gigabit Router User Guide
UBIQUITI NETWORKS ER-12 10 Port Gigabit Router User Guide

UBIQUITI NETWORKS 2.4GHz Air Router User Guide