Home > UBIQUITI NETWORKS > UBIQUITI NETWORKS 2.4GHz Air Router User Guide
UBIQUITI NETWORKS 2.4GHz Air Router User Guide
AirRouter User Guide
Chapter 3: AirOS™
Start The test is started using this button.
Ping
The Ping tool is used to check the preliminary link quality
and packet latency estimation between two network
devices using ICMP packets.
Speed Test
This utility allows you to test the connection speed
between two UBNT devices that are using firmware
version 5.2 or above. It should be used for a preliminary
throughput estimation between two network devices.
Network Ping
Select Destination IP A remote system IP can be selected
from the list, which is generated automatically (Select
destination IP) or may be specified manually.
Select Destination IP A remote system IP can be selected
from the list which is generated automatically or can be
specified manually.
Remote system access credentials (administrator
username - User and Password) should be provided for
the communication between two AirOS powered devices.
This is required in order to establish the TCP/IP based
throughput test.
Packet Count Enter the number of packets to send for
the ping test.
Packet Size The size of the ICMP packets can be specified
in this field.
Remote WEB port The remote Web port the AirOS
powered device should be specified in order to establish
TCP/IP based throughput test (i.e. 443 port should be
specified if HTTPS is enabled in the remote system). The
ICMP throughput measurement routine will be initiated if
the WEB port of the remote system is incorrect.
Start The test is started using this button.
Packet loss statistics and latency time evaluation is
provided after the test is completed.
Traceroute
The TraceRoute tool allows tracing the hops from the
AirRouter to a selected outgoing IP address. It should be
used for finding the route taken by ICMP packets across
the network to the Destination host.
Show Advanced Options Enables additional Speed Test
utility options. There are 3 options available for the traffic
direction while estimating the throughput maximum:
Direction There are three directions to choose from:
• Duplex Estimates the incoming (Rx) and the outgoing
(Tx) throughput at the same time.
• Receive Estimates the incoming (Rx) throughput.
• Transmit Estimates the outgoing (Tx) throughput.
Test Results Displays three result categories:
• Rx Displays the estimated incoming throughput.
• Tx Displays the estimated out-coming throughput.
• Total Displays the aggregated throughput.
Destination Host Enter the IP address of the destination
host to which you want to find the route.
AirView
Resolve IP Addresses Resolution of the IP addresses
(symbolically rather than numerically) can be enabled by
selecting this option.
AirView is a Spectrum Analyzer allowing you to see the
crowdedness of the radio spectrum. You need to run this
tool on a system connected to the AirRouter via Ethernet.
All wireless connections will be disconnected from the
AirRouter.
Note: Launching AirView will terminate all
wireless connections on the device.
Ubiquiti Networks, Inc.
31
| General | Details |
|---|---|
| Name | UBIQUITI NETWORKS 2.4GHz Air Router User Guide |
| Make | UBIQUITI NETWORKS |
| Language | English |
| Filetype | PDF (Download) |
| File size | 5.15 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding UBIQUITI NETWORKS 2.4GHz Air Router User Guide, please ask here and describe the problem in detail.
UBIQUITI NETWORKS ER-12 10 Port Gigabit Router User Guide
LINOVISION IOT-R41 Mini 4G LTE Router User Manual
TP-Link Archer GE650, GE550 Wi-Fi 7 Gaming Router User Guide
Superbox S3PRO Router User Guide
NEXXT Nyx1200-AC Plus Dual Band AC Wireless Router User Guide
D-Link DIR-X1860 AX1800 Wifi 6 Router Installation Guide
NETGEAR Nighthawk BE6500 BE5000 Dual Band Wi-Fi Router User Guide
TCL LINKHUB HH40L2 Wi-Fi Router User Manual
DrayTek V4.3.2.5 Vigor1000B Multi WAN Security Router User Guide
robustel R5020 5G WiFi Wireless Router Owner’s Manual
WaterWorld AX3000 Wireless Dual Band Gigabit Router User Manual