TRENDNET AX1800 Dual Band Wifi 6 Gigabit Dual Wan VPN SMB Router User Guide

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

49

50

51

52

53

54

55

56

57

58

59

60

61

62

63

64

65

66

67

68

69

70

71

72

73

74

75

76

77

78

79

80

81

82

83

84

85

86

87

88

89

90

91

92

93

94

95

96

97

98

99

100

101

102

103

104

105

106

107

108

109

110

111

112

TEW-929DRU  

TRENDnet User’s Guide  

Guest Network  

Wireless > Guest Network  

Creating an isolated and separate wireless guest network on each wireless band allows  

wireless clients to connect to your network for Internet access only and keep your local  

LAN network safe by restricting guest access to your LAN network resources such as  

shared documents and media files on your computers, network storage, and printers.  

Guest DHCP – The wireless guest networks are assigned to a different IP address subnet  

from the router LAN network for isolation.  

1. Log into your router management page (see “Access your router management page”  

on page 6).  

• IPv4 Address – Enter the IP address interface for the wireless guest network. The IP  

address subnet should be different from any other LAN or VLAN IP networks  

configured on your router.  

2. Click on Wireless and click on Guest Network.  

Note: The guest network IP address subnet only supports a class C subnet, subnet  

mask 255.255.255.0.  

3. Review the settings below. When complete, click Apply to save and commit your  

changes.  

• Start – Enter the starting value of DHCP IPv4 address range for the wireless guest  

newtork. (e.g. If your guest network IPv4 address is 192.168.20.1, entering 120 will  

define the first IP address of the DHCP pool is 192.168.20.120)  

• End – Enter the ending value of DHCP IPv4 address range. (e.g. If your LAN IPv4  

address is 192.168.20.1, entering 200 will define the last IP address of the DHCP  

pool is 192.168.20.200)  

First, choose the wireless band guest network you would like to configure, Wireless  

2.4GHz Guest Network / 5GHz1 Guest Network / 5GHz2 Guest Network.  

• Enable/Disable Guest Network – Selecting Enable turns on the wireless guest  

network and selecting Disable turns off the wireless guest network for the specific  

wireless band.  

• Lease Time – Enter the lease time in hours (h) or minutes (m) DHCP clients will hold  

their IP address settings before automatically requesting a new lease (IP address  

settings) from the internal DHCP server. (e.g. To specify 24 hours, enter 24h. To  

specify 480 minutes, enter 480m.)  

• Network Name(SSID) - This is wireless network name setting for the guest network.  

This name will differentiate your wireless network from other neighboring wireless  

networks so you can identify and connect your wireless client devices. Enter the  

wireless network name to assign to the wireless guest network.  

• Wireless Security – Allows you to configure the wireless encryption/security for the  

wireless band. See the “How to choose the type of wireless security” and “Secure  

your wireless network” sections for details configuring wireless security.  

Note: You can only select WPA2-PSK or WPA-PSK / WPA2-PSK Mixed Mode. EAP  

security cannot be applied to the wireless guest networks.  

• Separate Clients – This option allows all wireless client devices that are connected  

to the guest network wireless SSIDs to communicate with other wireless client  

devices. Checking this option will block communication between wireless client  

devices connecting with other wireless client devices. This feature is also known as  

L2 isolation or L2 client isolation.  

• Protected Management Frames - This feature enables protection for multicast  

management action frames.  

© Copyright 2023 TRENDnet. All Rights Reserved.  

35  

 

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• TRENDnet

Questions and Answers (0)

If you have any questions regarding TRENDNET AX1800 Dual Band Wifi 6 Gigabit Dual Wan VPN SMB Router User Guide, please ask here and describe the problem in detail.