TRENDNET AX1800 Dual Band Wifi 6 Gigabit Dual Wan VPN SMB Router User Guide

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

49

50

51

52

53

54

55

56

57

58

59

60

61

62

63

64

65

66

67

68

69

70

71

72

73

74

75

76

77

78

79

80

81

82

83

84

85

86

87

88

89

90

91

92

93

94

95

96

97

98

99

100

101

102

103

104

105

106

107

108

109

110

111

112

TEW-929DRU  

TRENDnet User’s Guide  

MWAN Status  

o

o

WAN1 (Failover to WAN2) – This is the default WAN mode. In this  

mode, the primary WAN interface is set to WAN1 and secondary WAN  

interface is set to WAN2. All traffic will be routed only through WAN1  

and will only route to WAN2 for Internet connectivity if the WAN1  

primary interface link status fails. If WAN1 connectivity is restored, all  

Internet traffic will revert back to the primary WAN1 interface.  

WAN2 (Failover to WAN1) –In this mode, the primary WAN interface  

is set to WAN2 and secondary WAN interface is set to WAN1. All traffic  

will be routed only through WAN2 and will only route to WAN1 if the  

WAN2 primary fails or is disconnected. If WAN2 connectivity is  

restored, all Internet traffic will revert back to the primary WAN2  

interface.  

• Interface Live Status – This section displays the current status of the WAN  

interfaces of your router. Tracking is enabled using physical link status and L2 based  

methods but the tracking status displayed refers to the status of IP based link  

tracking which can be configured under the Link Tracking section.  

Link Tracking – Allows you to setup WAN link tracking by pinging Internet IP addresses.  

• Enable Tracking – Checking this option enables IP based WAN link tracking on the  

specific WAN interface.  

• Tracking hostname or IP – Enter an Internet IP address to send ping requests used  

to verify the link status of a specific WAN interface. You can add additional IP  

address by clicking  

.

• Ping Interval – Click the drop-down list to set the time interval between  

consecutive ping requests.  

o

o

WAN1 (Fixed) – In this mode, all Internet traffic will only be routed to  

the WAN1 interface. The WAN2 interface is not used.  

WAN2 (Fixed) – In this mode, all Internet traffic will only be routed to  

the WAN2 interface. The WAN1 interface is not used.  

Default Traffic Rule  

• Policy – This setting controls the default WAN mode for Internet connectivity access  

for all local interface such as LAN, wireless LAN, and VLAN interfaces.  

© Copyright 2023 TRENDnet. All Rights Reserved.  

46  

     

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• TRENDnet

Questions and Answers (0)

If you have any questions regarding TRENDNET AX1800 Dual Band Wifi 6 Gigabit Dual Wan VPN SMB Router User Guide, please ask here and describe the problem in detail.