TRENDNET AX1800 Dual Band Wifi 6 Gigabit Dual Wan VPN SMB Router User Guide

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

49

50

51

52

53

54

55

56

57

58

59

60

61

62

63

64

65

66

67

68

69

70

71

72

73

74

75

76

77

78

79

80

81

82

83

84

85

86

87

88

89

90

91

92

93

94

95

96

97

98

99

100

101

102

103

104

105

106

107

108

109

110

111

112

TEW-929DRU  

TRENDnet User’s Guide  

5. In the Client IP field, enter an IP address range (within the same LAN IP subnet range)  

to assign to PPTP VPN clients. By default, the router LAN DHCP server pool is  

192.168.10.101-192.168.10.199, therefore, we will assign a range that does not conflict  

with the DHCP server range such as 192.168.10.10-192.168.10.20.  

PPTP VPN Server  

Security > VPN > PPTP Server  

You can enable and configure the PPTP VPN server on your router to allow remote  

computers or mobile devices with PPTP VPN support to connect securely over the  

Internet and access the company LAN network.  

6. Click the Authentication drop-down list and select MS-CHAPv2.  

7. Under the User Account section, enter a profile name for the new user account and  

click Add. (e.g. User1)  

Setting up the PPTP VPN server  

1. Log into your router management page (see “Access your router management page”  

on page 6).  

8. Check the Enable option and enter a User name and Password for the new user  

account. (e.g. User name: user1 / Password: user1)  

2. Click on Security, click VPN, and click the PPTP Server tab.  

3. Under Service Setting, check the Enable option to enable the PPTP server.  

9. Click Apply and the bottom of the page so save and commit the changes.  

4. In the Local IP field, enter the LAN IP address. (Default LAN IP: 192.168.10.1)  

Note: Entering the LAN IP address as the Local IP of the PPTP server ensures your PPTP  

VPN clients are able to access the Internet and the router LAN network via full tunneling.  

If an IP address different from the LAN IP is entered, PPTP VPN clients will be allowed to  

access router LAN and not the Internet.  

10. Click on the Status > Overview page and under the Network section, make note of  

your WAN IPv4 addresses to configure the PPTP VPN clients. You can also configure  

dynamic DNS to use a dynamic DNS hostname instead of dynamic WAN IP address.  

Note: For the VPN client computer, you will require a third party PPTP VPN software to  

be installed configured matching the PPTP VPN settings on your router. Typically, PPTP  

VPN software is pre-installed with most operating systems. Please refer to your  

© Copyright 2023 TRENDnet. All Rights Reserved.  

54  

   

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• TRENDnet

Questions and Answers (0)

If you have any questions regarding TRENDNET AX1800 Dual Band Wifi 6 Gigabit Dual Wan VPN SMB Router User Guide, please ask here and describe the problem in detail.