TRENDNET AX1800 Dual Band Wifi 6 Gigabit Dual Wan VPN SMB Router User Guide

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

49

50

51

52

53

54

55

56

57

58

59

60

61

62

63

64

65

66

67

68

69

70

71

72

73

74

75

76

77

78

79

80

81

82

83

84

85

86

87

88

89

90

91

92

93

94

95

96

97

98

99

100

101

102

103

104

105

106

107

108

109

110

111

112

TEW-929DRU  

TRENDnet User’s Guide  

5. In the Client IP field, enter an IP address range (within the same LAN IP subnet range)  

to assign to L2TP VPN clients. By default, the router LAN DHCP server pool is  

192.168.10.101-192.168.10.199, therefore, we will assign a range that does not conflict  

with the DHCP server range such as 192.168.10.10-192.168.10.20.  

L2TP VPN Server  

Security > VPN > L2TP Server  

You can enable and configure the L2TP VPN server on your router to allow remote  

computers or mobile devices with L2TP support to connect securely over the Internet  

and access the company LAN network. It is strongly recommended to enable L2TP VPN  

server with IPsec instead of L2TP VPN only due to the higher degree of security offered  

and supported on most modern computers and mobile devices.  

6. Check the Access LAN option to ensure VPN clients can access the router LAN  

interface. Note: If VLANs interfaces are created, they will available under Access vlan.  

7. Click the Authentication drop-down list and select MS-CHAPv2.  

Setting up the L2TP VPN server without IPsec encryption  

8. Under the User Account section, enter a profile name for the new user account and  

click Add. (e.g. User1)  

1. Log into your router management page (see “Access your router management page”  

on page 6).  

2. Click on Security, click VPN, and click the L2TP Server tab.  

9. Check the Enable option and enter a User name and Password for the new user  

account. (e.g. User name: user1 / Password: user1)  

3. Under Service Setting, check the Enable option to enable the L2TP server.  

4. In the Local IP field, enter the LAN IP address. (Default LAN IP: 192.168.10.1)  

10. Click Apply and the bottom of the page so save and commit the changes.  

Note: Entering the LAN IP address as the Local IP of the L2TP server ensures your L2TP  

VPN clients are able to access the Internet and the router LAN network via full tunneling.  

If an IP address different from the LAN IP is entered, L2TP VPN clients will be allowed to  

access router LAN and not the Internet.  

© Copyright 2023 TRENDnet. All Rights Reserved.  

57  

   

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• TRENDnet

Questions and Answers (0)

If you have any questions regarding TRENDNET AX1800 Dual Band Wifi 6 Gigabit Dual Wan VPN SMB Router User Guide, please ask here and describe the problem in detail.