TRENDNET AX1800 Dual Band Wifi 6 Gigabit Dual Wan VPN SMB Router User Guide

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

49

50

51

52

53

54

55

56

57

58

59

60

61

62

63

64

65

66

67

68

69

70

71

72

73

74

75

76

77

78

79

80

81

82

83

84

85

86

87

88

89

90

91

92

93

94

95

96

97

98

99

100

101

102

103

104

105

106

107

108

109

110

111

112

TEW-929DRU  

TRENDnet User’s Guide  

address cloning where you can assign a LAN computer MAC address to the  

WAN interface. Applied to DHCP client WAN protocol.  

•

Use DNS servers advertised by peer- If checked, automatically obtains DNS  

service IP address settings from your ISP. If unchecked, allows you to specify  

custom DNS server IP addresses. Applies to PPPoE/PPTP/L2TP WAN protocols.  

•

Override MTU – The default MTU (maximum transfer unit) or frame size is set  

to 1500 bytes. This parameter allows you to assign a new MTU size. For  

PPPoE/PPTP/L2TP WAN protocols, if you experience issues accessing SSL/HTTPS  

secure websites, you can try lower the MTU value to 1492 to decrease the  

amount of packet errors. Typically, this parameter does not need to be  

modified.  

Advanced Settings  

•

•

•

•

•

Bring up on boot – The parameter is enabled to bring the WAN1/WAN2  

interface up during device boot. Typically, this parameter does not need to be  

modified.  

Use builtin IPv6-management – Enables/disables IPv6 protocol on the  

WAN1/WAN2 interface. Typically, this parameter does not need to be  

modified.  

WAN VLAN Tagging  

Some ISPs require VLAN tag assignment of a specific VLAN ID when for Internet access  

or other services. You can follow the steps below to assign a specific VLAN ID to the  

WAN interface.  

Enable IPv6 negotiation on PPP link – Enables/disables IPv6 when using the  

PPPoE/L2TP WAN protocols. Typically, this parameter does not need to be  

modified.  

Use broadcast flag – Optional parameter if your ISP may requires that DHCP  

requests from your device be sent as broadcasts or unicasts for IP address  

settings for Internet access.  

1. Log into your router management page (see “Access your router management page”  

on page 8).  

Use default gateway – This parameter automatically created a default gateway  

route in the device routing table to access the Internet through the selected  

WAN interface. If unchecked, the default gateway route for Internet access  

must be entered in manually in the device routing table settings. Typically, this  

parameter does not need to be modified.  

2. Click on Network and click VLAN.  

3. Under the VID, you can enter the VID required by your ISP and set the WAN interface  

to tagged or untagged. Click Apply to save and commit the changes.  

•

•

•

•

•

Use gateway metric – This parameter is the route priority value assigned to the  

default gateway route. Range: 0-9999, 0 being the highest priority. Typically,  

this parameter does not need to be modified.  

Use DNS servers advertised by peer- If checked, automatically obtains DNS  

service IP address settings from your ISP. If unchecked, allows you to specify  

custom DNS server IP addresses. Applies to the DHCP client WAN protocol.  

Client ID to send when requesting DHCP – Optional parameter only required if  

your ISP requires a specific client ID to be sent when requesting IP address  

settings for Internet access. Applies to DHCP client WAN protocol.  

Vendor Class to send when requesting DHCP – Optional parameter only  

required if your ISP requires a specific vendor class to be sent when requesting  

IP address settings for Internet access. Applies to DHCP client WAN protocol.  

Override MAC address – Optional parameter used to change the WAN  

interface MAC address if you are experiencing issues obtaining IP address  

settings from your ISP. This parameter is more commonly known as MAC  

© Copyright 2023 TRENDnet. All Rights Reserved.  

14  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	TRENDNET AX1800 Dual Band Wifi 6 Gigabit Dual Wan VPN SMB Router User Guide
Make	TRENDnet
Language	English
Filetype	PDF (Download)
File size	2.5 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• TRENDnet

Questions and Answers (0)

If you have any questions regarding TRENDNET AX1800 Dual Band Wifi 6 Gigabit Dual Wan VPN SMB Router User Guide, please ask here and describe the problem in detail.