TRENDNET AX1800 Dual Band Wifi 6 Gigabit Dual Wan VPN SMB Router User Guide

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

49

50

51

52

53

54

55

56

57

58

59

60

61

62

63

64

65

66

67

68

69

70

71

72

73

74

75

76

77

78

79

80

81

82

83

84

85

86

87

88

89

90

91

92

93

94

95

96

97

98

99

100

101

102

103

104

105

106

107

108

109

110

111

112

TEW-929DRU  

TRENDnet User’s Guide  

wireless client devices. This feature is also known as L2  

isolation or L2 client isolation.  

Multiple SSID - This tab involves the configuration parameters for the additional SSIDs  

for a specific wireless band. Up to 7 additional SSIDs can be created per wireless band.  

You can view a summarized list of the current operating SSID and channels under Status  

> Overview in the Wireless section.  

▪

▪

WMM Mode – This feature enables Wi-Fi Multimedia QoS  

prioritization for wireless client devices that support WMM  

using the default priority level settings. Unchecking this  

option will disable WMM QoS on the wireless band.  

Enable HT20/40 coexistence – Applies to 2.4GHz band only.  

This option is enabled by default to ensure connection  

stability on the 2.4GHz band. When this option is enabled, the  

radio will attempt to operate at the higher 40MHz channel  

width mode if there are not too many neighboring wireless  

networks. If the current wireless environment is too busy the  

radio will automatically operate at the lower 20MHz channel  

width mode. Unchecking this option forces the radio to  

operate at the higher 40MHz channel which cause instability  

if there are too many neighboring 2.4GHz wireless networks.  

•

General Setup  

o

Enabled – Checking this option will enable the additional SSID on the  

specific wireless band. Before checking Enabled, click the Multiple SSID  

drop-down and select which index number SSID to configure.  

Multiple SSID – Click the drop-down to select the index number SSID  

to configure, then check Enabled.  

ESSID – This is wireless network name setting for the additional SSID  

band. This name will differentiate your wireless network from other  

neighboring wireless networks so you can identify and connect your  

wireless client devices. Enter the wireless network name to assign to  

the additional SSID.  

o

o

o

o

Hide ESSID – Checking this option will hide your wireless network  

name from being discovered by wireless client devices scanning for  

available wireless networks. This will not disable the additional SSID  

and wireless client devices can still connect. It only hides the network  

name from being discovered.  

Turn off wireless radio by schedule – Allows you to assign a time  

schedule when the band should be turned on and off.  

•

Wireless Security – Allows you to configure the wireless encryption/security for  

the additional SSID. See the “How to choose the type of wireless security” and  

© Copyright 2023 TRENDnet. All Rights Reserved.  

31  

 

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• TRENDnet

Questions and Answers (0)

If you have any questions regarding TRENDNET AX1800 Dual Band Wifi 6 Gigabit Dual Wan VPN SMB Router User Guide, please ask here and describe the problem in detail.