TRENDNET AX1800 Dual Band Wifi 6 Gigabit Dual Wan VPN SMB Router User Guide

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

49

50

51

52

53

54

55

56

57

58

59

60

61

62

63

64

65

66

67

68

69

70

71

72

73

74

75

76

77

78

79

80

81

82

83

84

85

86

87

88

89

90

91

92

93

94

95

96

97

98

99

100

101

102

103

104

105

106

107

108

109

110

111

112

TEW-929DRU  

TRENDnet User’s Guide  

OSPF (Open Shortest Path First)  

Network > Routing > OSPF  

1. Log into your router management page (see “Access your router management page”  

on page 6).  

2. Click on Network, click on Routing, and click on the OSPF tab.  

3. Review the OSPF Routing section. To save changes to this section, click Apply to  

commit and save your changes.  

In the Overview table, you can enable and configure RIP for each interface by clicking  

Edit next to the interface.  

• OSPF enable: Check the option to enable OSPF dynamic routing globally on the  

router.  

• Router ID: Enter the OSPF router ID.  

• OSPF enable: Check the option to enable OSPF dynamic routing on the specified  

interface.  

• Network type: Select the OSPF network type. Select only Point to Point or Point  

to Multi-point if connecting to your networking using PPP protocol, otherwise  

select Broadcast. If only exchanging OSPF routing information to one other  

device, select Non-Broadcast and enter in the Neighbor IP address at the bottom.  

• Key authentication – Enables MD5 authentication on all OSPF messages sent and  

received.  

• Key string – If authentication is enabled, enter the authentication key  

string/password to use for OSPF messages sent and received.  

• Plain text password – This option will set the password to be send in clear text  

instead of using the MD5 hash. This setting is not recommended.  

• Cost – Enter the OSPF cost value.  

• Priority – Enter the OSPF priority value.  

• Area - Enter the area id for OSPF.  

You can check the current routing table under Status > Routes under Active IPv6-  

Routes.  

© Copyright 2023 TRENDnet. All Rights Reserved.  

24  

 

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• TRENDnet

Questions and Answers (0)

If you have any questions regarding TRENDNET AX1800 Dual Band Wifi 6 Gigabit Dual Wan VPN SMB Router User Guide, please ask here and describe the problem in detail.