TRENDNET AX1800 Dual Band Wifi 6 Gigabit Dual Wan VPN SMB Router User Guide

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

49

50

51

52

53

54

55

56

57

58

59

60

61

62

63

64

65

66

67

68

69

70

71

72

73

74

75

76

77

78

79

80

81

82

83

84

85

86

87

88

89

90

91

92

93

94

95

96

97

98

99

100

101

102

103

104

105

106

107

108

109

110

111

112

TEW-929DRU  

TRENDnet User’s Guide  

•

Status – LAN Interface (br-lan)  

Configure WAN1 / WAN2 interfaces for Internet connectivity  

Network > WAN1/WAN2  

o

Uptime – Displays the amount time the WAN1/WAN2 interface has  

been up and continuously running. This time will reset if the router is  

powered off or router is rebooted.  

o

o

MAC-Address – Displays the current MAC address assigned to the  

WAN1/WAN2 interface.  

Rx – Displays the total amount of data received by the WAN1/WAN2  

interface in MB (# of packets) since the start of the currently displayed  

uptime.  

By default, the WAN configuration is set to use WAN1 as the primary connection for  

Internet connectivity and failover to WAN2 secondary if there is fault in connectivity to  

WAN1. This section will explain how to set up the WAN1 or WAN2 interfaces for  

Internet connectivity to your ISP (Internet Service Provider).  

o

o

Tx – Displays the total amount of data transmitted by the  

WAN1/WAN2 interface in MB (# of packets) since the start of the  

currently displayed uptime.  

IPv4: Displays the current IPv4 address settings assigned to the  

WAN1/WAN2 interface.  

1. Log into your router management page (see “Access your router management page”  

on page 6).  

2. Click on Network and click WAN. Click WAN1 or WAN2 to configure the selected  

WAN.  

•

Dual WAN priority – Displays the current priority assignment for the selected  

WAN interface. The WAN priority settings can be configured under Network >  

Multiple WAN. By default, the WAN configuration is set to use WAN1 as the  

primary connection for Internet connectivity and failover to WAN2 secondary if  

there is fault in connectivity to WAN1.  

3. Under the Common Configuration section, click the Protocol drop-down list and  

select the Internet connection provided by your ISP.  

•

•

Hostname to send when requesting DHCP – If your ISP requires to send  

specific hostname with the DHCP request for Internet connectivity, enter the  

required host name in the field. Applies to DHCP client/PPTP/L2TP WAN  

protocols.  

WAN mode – Applies to PPTP/L2TP WAN protocols.  

o

DHCP client – Using this option will set the WAN to obtain IP address  

settings automatically from your ISP for Internet connectivity.  

Static IP – Using this option will require you to manually enter the  

WAN IP settings required by your ISP for Internet connectivity.  

o

•

Connect mode – Applies to PPPoE/PPTP/L2TP WAN protocols.  

o

o

Keep alive – This option will keep the connection on at all times.  

On demand – This option will automatically disconnect after the max.  

idle time is reached and will automatically re-establish connection  

when Internet access is used.  

4. Complete all of the fields required by your ISP and click Apply to save and commit the  

changes.  

•

•

Access concentrator / Service name – Optional parameters required only if ISP  

requires for Internet connectivity. Applies to PPPoE WAN protocol.  

MPPE support– Optional parameter (applies Microsoft Point-to-Point  

Encryption) required only if ISP requires for Internet connectivity. Applies to  

PPTP WAN protocol.  

Below is a reference of the additional WAN settings if you choose to make other  

configuration changes to these sections.  

General Setup  

© Copyright 2023 TRENDnet. All Rights Reserved.  

13  

 

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• TRENDnet

Questions and Answers (0)

If you have any questions regarding TRENDNET AX1800 Dual Band Wifi 6 Gigabit Dual Wan VPN SMB Router User Guide, please ask here and describe the problem in detail.