TRENDNET AX1800 Dual Band Wifi 6 Gigabit Dual Wan VPN SMB Router User Guide

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

49

50

51

52

53

54

55

56

57

58

59

60

61

62

63

64

65

66

67

68

69

70

71

72

73

74

75

76

77

78

79

80

81

82

83

84

85

86

87

88

89

90

91

92

93

94

95

96

97

98

99

100

101

102

103

104

105

106

107

108

109

110

111

112

TEW-929DRU  

TRENDnet User’s Guide  

▪

▪

Internal Port – Enter the internal port number for the service  

to allow. Note: You can also enter a consecutive range of  

ports in the following format: 80-90  

Typically, the internal port or port range is same as the  

external port or port range.  

Enable NAT Loopback – Checking this option will allow  

devices to resolve the additional public static IP addresses  

from the local interfaces (e.g. LAN, VLAN). Unchecking this  

option will not allow to devices to resolve the additional  

public static IP addresses from the local interfaces. (e.g. LAN,  

VLAN)  

▪

Schedule – Allows you to select a schedule when the port  

forwarding rule should be enabled or disabled.  

• Name – Enter a name for the new one-to-one NAT rule.  

• Private IP address – Click the drop-down list to select a device from the list or enter  

the local/internal IP address of the device to forward the port/protocol service.  

• Public IP – Enter the additional static public Internet IP address you would like to  

map to the local/internal IP address.  

RADIUS Authentication  

Security > Administrator > RADIUS  

For additional security, the RADIUS authentication feature will allow you use an external  

RADIUS server to access the router management configuration page instead of using the  

internal administrator user account.  

• Interface – Click the drop-down list to select the external WAN interface(s) to allow:  

WAN1 or WAN2. For example, choosing WAN1 will only allow the port forward to  

work on inbound connection requests on WAN1 only and inbound connections  

requests on WAN2 will be denied.  

Note: This feature requires an external RADIUS authentication server to be set up and  

configured prior to enabling the feature on your router.  

• Forwarding Mode - Select DMZ to forward all ports/protocols or Port Forwarding  

to specify which ports/protocols to allow.  

o

DMZ – Selecting this option will set the rule to forward all  

ports/protocols to the device internal private IP address.  

1. Log into your router management page (see “Access your router management page”  

on page 6).  

▪

Schedule – Allows you to select a schedule when the port  

forwarding rule should be enabled or disabled.  

o

Port Forward – Selecting this option will allow to set the specific  

ports/protocols to allow for the rule.  

2. Click on Security and click on RADIUS.  

▪

Protocol – Click the drop-down list to select the protocol for  

the service to allow: TCP, UDP, TCP+UDP, ICMP, or Custom.  

External Port – Enter the external port number for the service  

to allow. Note: You can also enter a consecutive range of  

ports in the following format: 80-90  

3. Review the settings below. When complete, click Apply to save and commit your  

changes.  

▪

• Enabled – Check this option to enable RADIUS authentication.  

• Server IP Address – Enter the IP address of the external RADIUS server.  

© Copyright 2023 TRENDnet. All Rights Reserved.  

44  

 

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• TRENDnet

Questions and Answers (0)

If you have any questions regarding TRENDNET AX1800 Dual Band Wifi 6 Gigabit Dual Wan VPN SMB Router User Guide, please ask here and describe the problem in detail.