TRENDNET AX1800 Dual Band Wifi 6 Gigabit Dual Wan VPN SMB Router User Guide

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

49

50

51

52

53

54

55

56

57

58

59

60

61

62

63

64

65

66

67

68

69

70

71

72

73

74

75

76

77

78

79

80

81

82

83

84

85

86

87

88

89

90

91

92

93

94

95

96

97

98

99

100

101

102

103

104

105

106

107

108

109

110

111

112

TEW-929DRU  

TRENDnet User’s Guide  

•

•

Rate (times per second) – This value limits the amount of packets that can be  

received by the router per second for a specific session.  

Burst – This value limits the total amount of packets that can be received and  

stored in buffer memory for a specific session.  

One-to-One NAT  

Network > Firewall > One-to-One NAT  

If you have multiple static public WAN/Internet IP addresses assigned by your ISP, you  

can map the additional public IP addresses to a local computer or device on your  

network and allow all or specific ports or services similar to port forwarding but using  

different public IP addresses through your router. Please check with your ISP if you have  

multiple static public IP addresses available that can be used to map to devices on your  

local network.  

DMZ Host  

Security > Firewall > DMZ Host  

You may want to expose a specific computer or device on your network to the Internet  

to allow anyone to access it. Your router includes the DMZ (Demilitarized Zone) feature  

that makes all the ports and services available on the WAN/Internet side of the router  

and forwards all ports to a single IP address (computer or network device) on your  

network. The DMZ feature is an easy way of allowing access from the Internet however,  

it is a very insecure method and will open your local area network to greater threats  

from Internet attacks. It is recommended to use port forwarding instead to limit rules to  

specific ports/services only.  

Note: This feature will only work when using a static IP address WAN type/protocol.  

1. Log into your router management page (see “Access your router management page”  

on page 6).  

2. Click on Security, click on Firewall, and click on the One-to-One NAT tab.  

1. Log into your router management page (see “Access your router management page”  

on page 6).  

3. Review the settings below. When complete, click Add to add the new entry to the list  

and Apply to save and commit your changes.  

2. Click on Network, click on Firewall, and click on the DMZ Host tab.  

3. Review the settings below. When complete, Apply to save and commit your changes.  

•

•

Enable – Check this option to enable DMZ host.  

DMZ Host IP Address - Enter the IP address you assigned to the computer or  

network device to expose to the Internet. (e.g. 192.168.10.250)  

© Copyright 2023 TRENDnet. All Rights Reserved.  

43  

   

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• TRENDnet

Questions and Answers (0)

If you have any questions regarding TRENDNET AX1800 Dual Band Wifi 6 Gigabit Dual Wan VPN SMB Router User Guide, please ask here and describe the problem in detail.