TRENDNET AX1800 Dual Band Wifi 6 Gigabit Dual Wan VPN SMB Router User Guide

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

49

50

51

52

53

54

55

56

57

58

59

60

61

62

63

64

65

66

67

68

69

70

71

72

73

74

75

76

77

78

79

80

81

82

83

84

85

86

87

88

89

90

91

92

93

94

95

96

97

98

99

100

101

102

103

104

105

106

107

108

109

110

111

112

TEW-929DRU  

TRENDnet User’s Guide  

Ping Watchdog  

Tools > Ping Watchdog  

The Ping Watchdog feature allows you configure your router to monitor connectivity to  

a specific host IP address. If connectivity is lost to the specified host IP address, the  

router will automatically initiate a device reboot in an automatic attempt to re-establish  

previously lost connectivity.  

1. Log into your router management page (see “Access your router management page”  

on page 6).  

2. Click on Tools and click on Ping Watchdog.  

3. Review the settings below. When complete, click Apply to save and commit your  

changes.  

Check the router status information  

Dashboard > Overview  

You may want to check the system information of your router firmware, S/N, uptime,  

available memory, active connection, WAN interface information, wireless interface  

information, DHCP clients, connected wireless clients, dynamic DNS and active UPnP  

entries.  

Local Access Management  

• Enable – Check this option to enable the ping watchdog feature.  

• Ping Host / Interface – Enter the IP address to monitor and send ping requests to  

check connectivity.  

Note: You can additional host IP address entries to monitor by clicking  

o

.

1. Log into your router management page (see “Access your router management page”  

on page 6).  

ALL – Check all local and WAN interfaces for the specified host IP  

address.  

o

WAN1 – Check only the WAN1 interface for the specified host IP  

address.  

2

.

C

l

i

c

k

o

n

S

t

a

t

u

s

a

n

d

c

l

i

c

k

o

n

O

v

e

r

v

i

e

w

.

o

o

WAN2 – Check only the WAN2 interface specified host IP address.  

Import Default Gateway – Clicking this option will automatically  

attempt to copy both WAN interfaces default IP gateway to an  

available entry.  

•

System  

o

Hostname – Displays the currently assigned hostname of the router.  

The name other network devices identify the router on the network.  

Firmware Version – Displays the currently loaded firmware version  

and date.  

Local Time – Displays the current device time and date.  

Uptime – Displays the total amount of time the router has been up  

and running without reboot.  

o

• Ping Interval – Enter interval time for the router to send ping and connectivity  

check. Ex: Setting the interval to 5 Minutes will configure to send a ping and check  

connectivity every 5 mintes.  

o

o

• Fail Count to Perform Reboot – Once ping/connectivity check fails, this sets the  

maximum amount of attempts the router will attempt to check connectivity before  

initiating an automatic reboot.  

© Copyright 2023 TRENDnet. All Rights Reserved.  

86  

     

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• TRENDnet

Questions and Answers (0)

If you have any questions regarding TRENDNET AX1800 Dual Band Wifi 6 Gigabit Dual Wan VPN SMB Router User Guide, please ask here and describe the problem in detail.